Monsterlabo The Beast: limited edition housing with 400-watt passive cooler available again

Monsterlabo The Beast: limited edition housing with 400-watt passive cooler available again
Written by insideindyhomes

from Oliver Jaeger
The “The Beast” case from the Belgian manufacturer Monsterlabo is said to have been sold out for months, but now the fanless ATX tower can be pre-ordered again in limited quantities. 20 units are available as “The Beasts and Accessories” pack and 50 are available for future configurations.

It’s been almost two years since Monsterlab, a Belgian manufacturer of fanless cases, presented its tower “The Beast”, which is equipped with two total 400 watt coolers. A few units of the case were already sold before being sold out for months, according to Monsterlabo. However, since June 15, the case with the ATX form factor can be pre-ordered again, albeit in an updated version and in limited quantities.

The Beast case back on sale

70 units can be reserved for customers – 20 of them as “The Beasts and Accessories” package, while 50 units are reserved for future configurations. Anyone who pre-orders by June 30, 2022 will receive a 40 euro discount and pay 750 instead of 790 euros. Shipping costs are to be calculated in the fourth quarter of 2022. The case with ATX form factor has two 3 kg heat sinks (each with ten 6 mm heat pipes) that are designed for passive setups with up to 400 W TDP. The 450 x 380 x 210 mm housing is made of glass and aluminum and can accommodate graphics cards up to 290 mm (PCB). The following table lists the specifications of The Beast ATX Tower:

case format ATX PC case
Integrated cooling 2 x Passive Air Cooling Heatsinks (20 pipes & 6 copper thermal bridges)
motherboard format Mini-ITX to ATX
processor LGA 1150-1151-1200-2066 / AM3-AM3+-AM4-TR4
Graphic Card Maximum Length Up to 290mm (PCB)
power supply Up to ATX
Max CPU power 300W+
Max GPU power 300W+
Fanless configuration – Recommended Power CPU: 150W GPU: 250W
Active configuration – Recommended Power (2x 140 mm CPU: 250W GPU: 320W
materials Structural parts: steel (2.5 mm), copper and aluminum (6 mm)
Aesthetic parts: glass and aluminum
colours Black painted (textured and shiny)
feet Aluminum (6mm)
Graphics card cooling Full spreader covering
fan slot 2 x 140mm (+ 2 x 140mm optional)
Storage Up to 4 HDD 3.5” or 8 SSD 2.5”
front panel 1 headphone, 1 microphone, power, USB-C, USB 2.0 x2, USB 3.1 Gen 2 x2
back panel Customisable
Dimension 450mm x 380mm x 210mm
weight Heavy (approx.)

Matching: Monsterlabo The Beast: Tower with 400 watt passive cooler for CPU and GPU in ATX format

In terms of design and accessories, the case is said to have been slightly improved. According to the manufacturer, the following features are new to The Beast Tower:

  • New Spreader Gen. (if available)
  • Gelid Ultimate Thermal Pads for all PCs to improve heat exchange
  • New packaging
  • Improved window and aluminum side mounts
  • Updated version of the cable extension + selection of silicone grommets
  • New fan mount with metal spring wire
  • In development: a new SSD support to improve accessibility and cable management.

Source: Monster Lab

#Monsterlabo #Beast #limited #edition #housing #400watt #passive #cooler

About the author


Leave a Comment